Context menu of element editing

The context menu of element editing can be exposed from various editing windows when the right mouse button is depressed.

The set of functions supplied within this context menu depends on the actual number of elements selected from the element list.

Add→Append	Appends a new element (of type "Empty") to the end of element list
Add→Before Selected	Inserts a new element (of type "Empty") just before the one currently selected into the  element list.
Add→After Selected	Inserts a new element (of type "Empty") just after the one currently selected into the  element list.
Duplicate	Inserts a copy of currently selected elements into the element list. Remark: Holding SHIFT-key while that menu is activated will additionally swap coordinates of the duplicate. If several elements are selected their copies are appended to the end of element list retaining their order. After being inserted all these element copies are marked selected thus being ready for further processing (Translate, Rotate, Mirror etc.). See also: Copy & Paste also Translate window

Move (Order)→Relegate to Backmost	Reorders selected element(s) in the element list to the "backmost" position. The element is then located at the beginning of the list thus now being potentially overlapped by all other elements. If more elements are selected then each one is relegated by the same distance as the backmost selected one. This action is inhibited if the chosen element does already occupy the first (backmost) location in the list.
Move (Order)→Relegate	Reorders selected element(s) in the element list one position "backwards". The element is then located earlier in the list thus now being potentially overlapped by another element which have thus been promoted to the location of the element relegated. If more elements are selected then each one is relegated by one position in the list order. This action is inhibited if the chosen element does already occupy the first (backmost) location in the list.
Move (Order)→Promote	Reorders selected element(s) in the element list one position "towards front". The element is then located later in the list thus now potentially overlapping another element which have thus been relegated to the location of the element promoted. If more elements are selected then each one is promoted by one position in the list order. This action is inhibited if the chosen element does already occupy the last (front most) location in the list.
Move (Order)→Promote to Frontmost	Reorders selected element(s) in the element list to the "frontmost" position. The element is then located at the end of the list thus now potentially overlapping all other elements. If more elements are selected then each one is promoted by the same distance as the frontmost selected one. This action is inhibited if the chosen element does already occupy the last (front most) location in the list.
Delete (DEL key)	Deletes (irrevocably) currently selected element(s) from the element list. After deletion of single element is executed the selection moves to a foregoing element. When first element is deleted the selection move to the element advanced to first positon. Deletion request of one or more elements is executed after being additionally confirmed in a dialog window shown. See also: Cut

Translate	Provides a translation of one or many elements by a distance (dX,dY,dZ) entered in the window Translate . Remark: Translation itself is invoked from the Translation window.
Stretch	Provides stretching of one or many elements by a specified distance in specified coordinate direction. Extension (or shrinking) of elements is given by specific plane coordinate selection an shift interval within the Stretch window.
Rotate	Provides rotation of one or more elements around an axis parallel to one of coordinate axes. The position of the rotation axis is given by the choice of one rotation plane and two coordinates within the window Rotate.
Mirror	Provides mirroring of one or more elements to a plane parallel to one of coordinate planes. The position of mirroring plane is given by the choice of mirroring direction and its coordinate position in the window Mirror.

Select→By Group→...	Selects all elements assign to one specific Group (the group name). Remark: The menu offers a list of all available groups to chose from. If there are no groups used yet this menu has no function. Remark: For 3D-Layered models the selection operation is applies only to currently active layer.
Select→By Type→...	Selects all element of one specific type (Empty, Material, Space, etc.) Remark: For 3D-Layered models the selection operation is applies only to currently active layer.
Select→By Name→...	Selects all elements having one specific name. Remark: The menu offers a list of all names - names of spaces, power sources, surfaces and materials) to chose from. Remark: For 3D-Layered models the selection operation is applies only to currently active layer.
Select→All (CTRL-A)	Select all elements. Remark: For 3D-Layered models the selection operation is applies only to currently active layer.

Assign→Material→...	Assign a material to all selected material boxes. All materials used in the project so far are offered for choice. Remark: If within current selection there are elements of type incompatible with the assignment to be performed, the action is executed on compatible elements only after additional user confirmation dialog. If several elements are selected user's confirmation is also requested by a dialog. Error message is shown if neither element matches the expected type.
Assign→Surface→...	Assign a surface to all selected space boxes. All surfaces used in the project so far are offered for choice. Remark: If within current selection there are elements of type incompatible with the assignment to be performed, the action is executed on compatible elements only after additional user confirmation dialog. If several elements are selected user's confirmation is also requested by a dialog. Error message is shown if neither element matches the expected type.
Assign→Space name→...	Assign a space name to all selected space boxes. All space names used in the project so far are offered for choice. Remark: If within current selection there are elements of type incompatible with the assignment to be performed, the action is executed on compatible elements only after additional user confirmation dialog. If several elements are selected user's confirmation is also requested by a dialog. Error message is shown if neither element matches the expected type.
Assign→Power name→...	Assign a power source name to all selected power source boxes. All power source names used in the project so far are offered for choice. Remark: If within current selection there are elements of type incompatible with the assignment to be performed, the action is executed on compatible elements only after additional user confirmation dialog. If several elements are selected user's confirmation is also requested by a dialog. Error message is shown if neither element matches the expected type.
Assign→Colour...	Assign a colour to all selected element (standard colour dialog is shown) See also: Element Editor
Assign→To Group→...	All selected elements are assigned to the group name chosen (in addition to group assignments already in place). Remark: The menu offers a list of all groups used in the project so far to chose from. If there are no groups used yet this menu has no function.
Assign→To New Group...	A dialog will be offered to enter the group name. All selected elements are assigned to the group name entered (in addition to group assignments already in place).
Assign→To Type→...	The type of currently selected element(s) will be changed to the one of Material box(es), Power box(es), Space box(es) or Empty box(es) . When the assignment is done for multiple elements a confirmation will be required.
Remove from Group	Assignment to one specific group name is deleted from all selected elements. Remark: The menu offers a list of all groups applicable to selected elements to chose from. If no one of selected elements is assigned to any group this menu has no function.

Undo (Ctrl-Z)	Undoes (reverts) the latest action(s) in the given editing context.
Redo (Ctrl-Y)	Redoes (reapplies) the action lately undone in the given context.

Important: Shortcuts shown above CTRL-A, CTRL-C, CTRL-X, CTRL-V, DEL of this context menu are not available with Element-Editor window. These key combinations have further specific functions respective to input fields of Element-Editor window.

See also: Element Editor, Element selection window, Elements 2D window, Elements 23 window, Editing windows (Input windows)